Snmp V3 User Editor Dialog - Qlogic SANbox 5802V User Manual

4 – Managing Switches
Configuring SNMP
Table 4-9
the user, click the OK button to save the settings and close the dialog.
User Name
Group
Authentication Type
Authentication Phrase
Confirm Authentication Phrase
Privacy Type
Privacy Phrase
4-32
Figure 4-13 SNMP v3 User Editor Dialog
describes the SNMP v3 User Editor dialog parameters. After configuring
Table 4-9. SNMP v3 User Editor Dialog
Parameter Description
Name for this SNMP v3 user.
Read Only permits user to view only SNMP v3 user
settings. Read Write permits user to view and change
SNMP v3 user settings.
None, MD5, SHA. If None, no authentication phrase
is required. MD5 and SHA require authentication
phrase.
A unique string or phrase to serve as an pass-
word-like authentication phrase.
Re-enter the same unique string or phrase to serve
as an password-like authentication phrase.
DES or None. If None, no privacy phrase is required.
A unique string or phrase to serve as an pass-
word-like privacy phrase.
S
59264-01 A