Restoring The Zoning Database From A File; Reloading The Source Zoning Configuration On The Switch; Restoring The Default Zoning Database - Qlogic SANbox 5802V User Manual

A

Restoring the Zoning Database from a File

CAUTION!
Do the following to restore the zoning database from a file to a switch:
1. Open the Zoning menu and select Edit Zoning to open the Edit Zoning
window.
2. Open the File menu and select Open File. A popup window will prompt you
to select an XML zoning database file.
3. Select a file and click Open.

Reloading the Source Zoning Configuration on the Switch

Do the following to reload the original zoning database configuration to a switch:
1. Open the Zoning menu and select Edit Zoning to open the Edit Zoning
window.
2. Open the File menu and select Reload from the Source.
3. Click the OK button to load the original zoning database configuration to the
switch.

Restoring the Default Zoning Database

Restoring the default zoning clears the switch of all zoning definitions.
CAUTION!
To restore the default zoning for a switch:
1. Open the Zoning menu and select Restore Default Zoning.
2. Click the OK button to confirm that you want to restore default zoning and
save changes to the zoning database.
59264-01 A
Restoring the zoning database from a file will replace the current
zoning database on the switch.
This command will deactivate the active zone set.
3 – Managing Fabrics
Zoning
3-25