Table of Contents
Advertisement
Top cover assembly removal
See
"Top cover assembly Also order cable tie parts packet (P/N 40X1648)" on page 7-3
1.
Remove the redrive cap. See
2.
Remove the front right light shield screw. See
3.
Remove the top cover screws (A) from the rear of the printer.
4.
Open the MPF, and remove the top cover screw (B) from the left side of the printer.
5.
Open the front cover assembly.
"Redrive cap removal" on page
"Front right light shield removal" on page
A
4-12.
B
Repair information
5061
for the part number.
4-42.
4-13
Advertisement
Table of Contents
