Table of Contents
Advertisement
TOC
Section 7:
Important Note:
Label Sensing Methods
Method 1: Label
Gap Sensing
Method 2: Thru-Hole
Sensing
Method 3: Reflective/Black
Mark Sensing
(Black Mark must be printed
on back side of label stock)
Note: See table below for Max and Min values in inches and mm..
Label/Print width
Liner/Media width
Label height/length
Gap between labels
Width of thru-hole
opening
Media and Roll Specifications
30
Media and Roll
Specifications
Printing labels is not recommended as this printer
was designed for continuous media. However, since
the printer is capable of sensing labels, the following
information that is specific to labels is provided with
no representations regarding reliability.
Liner/Media Width
Width of Opening
Max
4.25" (108mm)
4.25" (108mm)
24" (609.6mm)
0.75" (19mm)
0.5" (12.7mm)
Label Width
Distance from
edge of label
to edge of liner
Min
0.75" (19mm)
1" (25.4mm)
0.75" (19mm)
0.10" (2.5mm)
0.375" (9.5mm)
INDEX
Gap Between
Labels
Label Height
Black Mark
Width
Advertisement
Table of Contents
