Table of Contents
Advertisement
TOC
The
Power Input Port
The internal power supply is auto-switching in the range of
100-240v.
The Power Switch shuts off all power to the Publisher.
The eSata ports are only visible on Blu-ray units. You will need
to connect an eSATA cable to both of the eSATA ports.
E.
SYSTEM REQUIREMENTS
PC:
Before getting started, it is important for you to verify that your
PC meets the minimum system requirements.
Celeron processor or better running Windows XP , Vista or 7.
•
1GB or greater RAM
•
•
Free hard drive space of at least 10 GB.
•
Available USB 2.0 Port. (This looks the same as a USB 1.0
port. Make sure you have a USB 2.0 port for optimal
performance)
If your PC does not have at least these minimum system
requirements, system performance may not be acceptable.
MAC:
•
Intel CPU running OS X version 10.6 or higher
•
512 MB RAM
•
Free hard drive space of at least 10 GB
•
Available USB 2.0 Port
•
Do not connect the Publisher to any USB hubs or the USB
port on your keyboard. It should be connected directly to
an onboard USB 2.0 port.
If your computer does not have at least these minimum system
requirements, system performance may not be acceptable.
F. LOADING MEDIA (DISCS)
NOTE: Your Publisher can print directly onto virtually any brand of inkjet
printable-surface CD/DVD media. However, different brands of discs
have different printable coatings. Because of this, you may need to
adjust the printer driver settings to accommodate your specific
brand of CD/DVD media. Refer to Section 2B.2 and 2E for further
printer driver information.
6 Getting Started
connects to the included power cable.
INDEX
Hide quick links:
Advertisement
Table of Contents
