Remote Control - Zenith SY3588 Operating Manual & Warranty

• Z-TRAK TRACKBALL REMOTE CONTROL
INTRODUCTION
This multi-brand remote control operates the common features of most, but not all, models and brands of IR (infraroS)
controlled VCRs. Some functions of your particular VCR may not be controlled by this remote. In such cases, use the original
remote control for your VCR.
BATTER Y INS TA LLA TION
13 arteries are provided, but must installed before using the re-
mote control. When it no longer functions normally, or if it
loses memory, replace the batteries with two high-quality, al-
kaline, size AA batteries. Match positive with positive (+ with
+), negative with negative (- with -) as shown inside the bat-
tery compartment.
VCR Brand ('.ode Auto Find
Option
Unless your VCR responds to the factory preset code com-
monly used for Zenith VCRs, you may need to use Auto Find
to program the VCR code whenever you replace batteries. See
following pages for remote programming Auto Find instruc-
tions.
Nores:
• Do not place heavy objects on top of the remote control
keys; prolonged unintentional operation of the remote
shortens battery life.
• Remove the batteries if the remote control will not be used
for a month or more. Battery leakage can permanently
damage the remote, for which Zenith is not responsible.
CHOOSING OPERA TING MODE
AA Batteries
To control your TV or VCR with this remote, you must first choose the mode of operation.
Press the TV mode key to control the TV or press the VCR mode key to control the VCR.
TV
Press to select "IV mode.
VCR
Press to select VCR mode.
:,o63-o
12 _ 1