Zenith SY3588 Operating Manual & Warranty page 8

SETUP CHECKLIST
_ ote: Turn off the power on all system components before making connections. Do not disconnect your cable box power
, cord, it may interfere with your cable service.
3 Connect All Source Equipment to TV
E3
[3
E3
[-1
[3
[3
[3
Connect your Antenna or Cable service line as well as any accessory equipment such as a V('R. Do not connect this TV or
other system component equipment to an electrical outlet that is controlled by a wall switch.
Install Batteries in the Remote Controls
Batteries are provided but must be installed in both the universal and trackball remote controls.
Turn on All Source System Components
The TV and other Source equipment you connected to the TV/Source Connection Panel or, if available, the "I_/"Front Panel.
Select Main Picture Source and PIP Inset Picture Source
The IMam Picture Source and the PIP Inset Window Picture Source can be any source listed anc available in the Source Menu.
Subscribe to StarSight Service (Optional)
You do not have to subscribe to StarSight to operate this TV.
Refer to the StarSight portion of the operating guide for StarSight subscription information.
Perform Projection TV Setup (Projection TV Models Color Convergence)
This procedure should be performed when the TV is first installed and if it is moved later to a different location.
Perform Auto Program Procedure (Not required with StarSight Service)
This procedure finds and stores the available channels from your local broadcast area in the TV's memory.
Options
You may consider using the following options: Surf Channel Scan, Channel Labels, Channel Add/Delete/Surf_ Source ID, and
make changes to the Audio and Video settings to your personal preference.
Two Tuner Capability
Using either Ant/Cable 1 or 2 sources gives you two-tuner capability; one Tuner for the Main Picture, and a second Tuner for the
PIP Inset Picture. (Use the TV to tune 2 live TV channels, depending on hookup.)
Options Quick Overview
Surf Channel Scan -- Create a list of only the channels you view frequently for access by Chan Up/Down.
Channel Labels -- Include a channel or network name such as HBO, Max etc., for the channels you receive or give a channel a cus-
tom name of your own.
Channel Add/Delete/Surf-- Allows to you include or omit any available channel from the channel scan accessed by Chan
Up/Down.
1-Minute Commercial Surf-to-PIP -- Allows you to transfer temporarily your surf channels to the Main screen picture for viewing
while a commercial is being broadcast.
Source ID -- Allows you to label and identify your system component by type of equipment such as VCR, Photo CD, etc.,
Audio/Video Adjustments -- You can set the video and audio adjustments to your personal preferences.
Color Conver£ence -- Projection TVs only. Aligning Red and Blue colors over Yellow yields the ultimate in picture appearance.
"]?hereare some TV models that have built-in and optional screen protectors, be sure to follow instrnJclions when cleaning them be-
comes necessary.
..o
3363-0 VIII