Zenith SY3588 Operating Manual & Warranty page 27

UNIVERSAL REMOTE AUDIO MENU
! I
Audio
Menu
Bass
Treble
Balance
Audio Mode
SoundRite
Front Surr
Rear Surr
Speakers
4
With PIP active, to select
the audio (sound) from
the Main Picture source
or the PIP Inset, press
the note key repeatedly.
(Selected note symbol
(Audio Source) will be a
white color.) Unselected
audio source note will
be a gray color.
With no menus on-
screen press the note key
to turn Surround Sound
effect On and Off.
Ch 11-w-r-rw
1:17
Stereo
MENU OPERATION
1_ Press MENU repeatedly until the
AUDIO MENU is shown.
Press the Left/Right arrow keys to ad-
jusl tl:e selected option.
Bass
Treble
Balance
Audio Mode
(SAP is not an optionfor
the Video or S-Video
sources. Audio
signals
into a video source are
assumed to be monaural
or stereo. )
Press the Up/Down arrow keys until
the desired option is either highlighted
or selected.
Press QUIT or wait a few seconds for
the TV to return to normal operation.
Adjusts', the BASS (low-frequency) level.
Adjusts; the TREBLE (high-frequency) level.
Adjusts the balance of sound between the two speakers.
Allows you to select STEREO, MONO or 2ND AUDIO/SAP operation.
STEREO: Directs the sound to the Left and Right speakers as supplied by the program. Stereo is the
recommended choice: The TV switches automatically between the STEREO and MONO
modes depending on the type of signal being received.
MONO: Directs the same sound to both Left and Right speakers, even if the program being
received is in stereo.
2ND AUDIO/
SAP:
Directs the sound for the Second Audio Program (second language) to both the Left and
Right speakers. SAP sound is always monaural. If SAP is selected, you hear the SAP
(usually a second language). When the SAP broadcast ends, the TV switches
automatically (defaults) to the type of signal being received, STEREO or MONO. The
"IV switches back to 2ND AUDIO/SAP when the SAP broadcast resumes.
SoundRite When channels are changed, automatically adjusts the sound level to the prevailing sound level. Sound
from newly selected channel will be the same volume as the previously tuned channel.
Front Surr Turns On and Off the Front Surround effect. Front Sound is only available i:; a surround encoded stereo
signal is being received.
Rear Surr Adjusts the level of Surround Sound provided to the optional rear surround sound speakers.
Speakers Turns internal speakers On and Off. (Off indicated by "EXT Volume" on Volume bar.)
Note:
[] All adjustments on the Audio Menu are optional You do not have to adjust these features in order to use your TV.
3061-0 9 -- 1