Zenith SY3588 Operating Manual & Warranty page 16

I
THE FIRST TIME YOU OPERA TE YOUR TV
STEP 2. INSTALL THE BATTERIES INTO THE REMOTE CONTROLS
Batteries are provided but they must be installed before using
the remote controls. When a remote no longer functions nor-
mally, or when it loses memory, replace the batteries with
high-quality, alkaline batteries. !vlatch plus with plus (+ with
+), minus with minus (- with -), as shown in the battery com-
pamnent.
Unless your equipment responds to the factory preset codes,
you will need to reprogram the remote controls with the codes
of your particular equipment each time you replace batteries.
Universal Remote
(Uses 2 size AAA
batteries.)
Notes:
[] Do not to place heavy objects on top of the remote control
keys. Prolonged unintentional operation of the remote short-
ens batter?, life.
[] Remove the batteries if the remote control will not be used
for a month or more. aRE
MANUFACTURER IS NOT RE-
SPONSIBLE FOR DAMAGE CAUSED BY BATTERY LEAKAGE.
Z-Trak Remote (
(Uses 2 size AA
batteries.)
STEP 3. SELECT YOUR MAIN SOURCE & PIP (Picture-in-Picture) SOURCI"
A TV source refers to the equipment connected to the TV/Source Connections Panel that supplies tbe picture and sound to your TV.
You select the viewing source by using the Source Menu. Use the universal remote control.
.Main Picture Source
1. Press SOURCE on
your ren_tote to view
the Source Menu.
:2.
Use Up or Down
arrow key to select the
Main Picture source
--which corresponds
to the jack(s) on the
TV/Source
Connection Panel.
:3. Press QUIT to remove
the menu.
pIP Inset Picture Source
1. Press SOURCE on
your remote to view
the Source Menu.
2. Use the Left or Right
arrow key to select
PIP Source column.
3.
Use the Up or Down
arrow key to select the
PIP Window Inset
Picture source.
4. Press QUIT to remove
the menu.
Ource
nu
Main <1, PIP
Ant/Cable 1 ]
Ant/Cable 2
Video 1
Video 2
S-Video
Front Video
Frnt S-Video
Main 4), PiP
I
Ant/Cable 1 ]
Video 1
Video 2
S-Video
Front Video
Frnt S-Video
Source Menu with Main Source and PIP Source set to
Ant/Cable 1. Connections must be made to the corre-
sponding jack(s) on the TV/Source Connection Panel.
Note: If you select Ant/Cable I or 2 for the Main Source,
the TV will auiomatically select it also for the PIP Source.
N_3-O 2 -- 2