Table of Contents
Advertisement
ADDITIONAL INFORMATION
AUX Channel (Use to Play or Record from Accessory. System Components)
(Connected
to the VCR Audio/Video
In Jacks)
Step 1. Press MENU. Press ADJUST
Left/Right
repeatedly
to choose SETUP,
press MENU.
Step 2. Use SELECT
Up/Down
to choose
SOURCE
SELECT.
Step 3. Use ADJUST
Left/Right
to specify AUX.
This sets up the VCR to receive the signal from the
system component
(Video Disk Player, Hi-Fi Ste-
reo, TV, Video Camera,
Camcorder
another VCR
etc.,) connected to the VCR AUDIO/VIDEO
IN
(Rear or Front) connection jacks.
Note: When finished with the AUX channel,
use
the previously
describext method to choose
TUNER.
AUX Channel
Direct Access
Another method of cl:toosing the AUX channel is to
use CHANNEL
Up/Down.
The AUX Channel,
is
the lowest/highest
number in the channel scan.
When you wish to return to normal VCR opera-
tion, simply use CHANNEL
up/down to choose a
different
channel.
Index Search (Use to access each recorded
segment's
beginning)
Each time a recording
starts, the VCR marks that
location with an index mark; Index 1, Index 2, In-
dex 3, etc. These locations can then be accessed by
using the Search mode. (From the Stop or Play
mode,) press SEARCH
to begin Index Search
mode.
For example,
rewind the tape to the, beginning.
Press SEARCH.
To advance the tape to Index loca-
tion three, follow on-screen
instructions,
then press
3. The tape will mow_ to recording
stm_t Index loca-
tion 3 and start playback.
Note: This feature only
works with tapes recorded on this VCR.
Real-Time
Tape Counter
The Real-Time
Tape Counter will only count re-
corded segments on VHS cassette tapes. If the on-
screen tape counter stops at a location while the
tape is moving, then the recorded segments have
ended and blank segments are being passed over at
that location on the tape; the Real-Time
Tape
Counter will not count the blank (unrex-orded) seg-
ments of a tape.
MEMORY_
Press while a tape is being played or
recorded,
to zero the Real-time
tape counter.
If
you activate the Counter
Memory
feature,
the VCR
will automatically
stop at the M 0:00:00 position
when the tape is rewound.
Special
Menu
_AUTO
CLOCK SET On/Off Adjustment.
--AUTO
DAYLIGHT
SAVINGS
ADJUSTMENT
On/Off.
Step 1. Press MENU to place VCR Main Menu on
TV screen.
Step 2. Press 4567 to access the Special Menu.
Use SELECT
and ADJUST
keys to choose and
specify:
Auto Clock Set/On--
VCR will automatically
set
the clock.
Auto Daylight
Savings
Adjustment/On--
VCR
will automatically
adju:_t
t he VCR clock for Day-
light savings time.
Press QUIT when finished.
Note: Choose one option --Auto
Clock Set and
Auto Daylight Savings cannot be actiw_ at the same
time.
Auto Tape Recording
Speed Switching
While recording in SP (Standard Play) mode, if the
VCR detects a shortage of tape necessary to com-
plete the recording in SP mode it will automatically
switch to EP (Extended Play) mode',to complete the
recording assignment.
13 _ 1
2961-0
Advertisement
Table of Contents
