Additional Information Ez Functions - Zenith VCS442 Installation And Operating Manual

EASY FUNCTIONS
CH 4
SP WABC STEREO
"Home video"
JUL 5 , MON 2:15 PM
Easy Information Screen
(Station ID)
PROGRAM DETAILS
"Home video"
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
Easy Information Screen
(Program details)
This page explains how to operate the easy functions.
EASY REPEAT
You can replay a specified segment twice.
1.
During playback, press and hold ez REPEAT for more
than 3 seconds at the end of the segment and your VCR
will start reverse search.
2.
Release ez REPEAT at the beginning of the segment.
The segment is replayed twice automatically.
To return to normal play, press ez REPEAT again during easy
review playback.
EASY INFORMATION
If the Extended Data Service (XDS) signals are provided along
with normal TV signal in your area or during playback of a tape
recorded with Extended Data Service (XDS) signals, the station
ID, program title and program details are shown on the TV
screen.
When viewing a channel with Extended Data Service (XDS)
signals, press ENTER button then the station ID will appear on
the TV screen. Press ENTER button again and the program
details will appear on the TV screen.
When viewing a tape recorded with Extended Data Service
(XDS) signals, press ENTER button twice then the program
title and program details will appear on the TV screen.
Program Details
Length: Indicates the run length of a program.
Time Remaining: Indicates the remaining time of a program.
Rating: Indicates the rating of the current program (N/A, G, PG,
PG-13, R, NC-17, X and Not Rated). The rating N/A means that
the motion picture ratings are not applicable to this program.
EASY POWER OFF
Press ez POWER OFF button during play.
The VCR will automatically stop the tape, rewind to the begin-
ning and eject the tape. It will then turn itself to standby.
31