Whirlpool SF377PEGT5 Use & Care Manual page 31

2. Holdovendoorsothatthetop edgeof each Doorstop Range
hingehanger i s horizontal. Inserthingehangers
intothe frontframehingeslots.
3. Tilttop of doortowardrange. S lidehingehang-
ersdownontofrontframesupportpins.
NOTE: M akesurethehingehangers a refullyseated
andengaged onthesupportpins.
4. Insert t hedoorstopclipwiththe angular s urface
atthe top oftheframehingeslot,thenpushin
the bottomofthe clipuntilflanges areflushwith
thefrontframe.
5.Openthedoorcompletely a ndremove thedoor
removal pins.Savedoorremoval pinsforfuture
use,
clip ...........
Hinge
Door removal ....... _ ....................... hanger
pin hole
.......... /
.......... Support pins
Front frame
hinge slot
Angular
6. Close the door.
Door removal
pin hole
door stop
clip
•if,,,!iiiiiiili!:!!i iliiiiiiJiii!!iiiiiiiiii!iiiiiiii iiiiliiii !iiiiiiiiiiiiiiill ....
The oven light will come on when you open the
oven door.
• Push the oven light switch on the backguard.
1. Unplug range or disconnect power.
2. Remove the glass bulb cover in the back of
the oven by turning it
counterclockwise.
4. Replace the light bulb cover by turning it
clockwise.
5. Plug in range or reconnect power.
3. Remove the light bulb from its socket. Replace NOTE: The oven light will not work during the
the bulb with a 40-watt appliance bulb. Self-Cleaning cycle.
31