Power-Up Options - Fluke 183 User Manual

Button Power-up Function
RANGE Sets meter to 500 mV
(HI high impedance mode
1
mV)
MIN MAX Sets meter to 1
1
( 1 SEC ) second MIN MAX
mode
REL Turns off beeper
1
( bEEP )
Shift Sets meter to high
(yellow resolution (50,000
button) count) mode
1
( HrES )
LIGHT Disables light timeout
1
( LOFF )
Softkey Displays software
version and calibration
date
Table 3. Power-up Options
Enables high impedance (> 10 M )
across the input jacks in the 500 mV
DC range so that the device under
test is not loaded when you measure
small voltages.
See "MIN MAX" for more
information.
Double, triple, and continuity beeps
are not affected.
See "High Resolution (HrES) 50,000-
Count Mode" for further information.
--
Displays the software version
(M.mm, where M is the major
revision and mm is the minor
revision). Press softkey
to display the date the meter was last
calibrated (upper display shows
month and main display shows year).
True RMS Digital Multimeters
Special Features
Explanation
again
29