Auto Fuse Detection - Fluke 183 User Manual

183 & 185
Users Manual
Once you set the meter to MIN MAX mode, the meter will uprange, or
automatically increase range setting, but will not downrange. You must exit
MIN MAX mode to restore downranging abilities to the meter.
While in MIN MAX mode, press to stop the recording and freeze the
HOLD
most recent MIN MAX values. Press to cycle through the held
MIN MAX
values. Press a second time to reset and restart the MIN MAX
HOLD
recording.
While in MIN MAX mode, activate memory mode to hold the displayed MIN
MAX value for storage into memory without stopping or resetting the MIN
MAX recording.
To exit MIN MAX mode and clear stored values, press and hold MIN MAX for
two seconds.

Auto Fuse Detection

The meter automatically verifies the integrity of the internal fuse when you set
the measurement function knob to A. If an open fuse is detected, the word
FUSE shows on the main display.
See "Replacing the Fuse" for instructions on how to replace fuse F1.
32