Batteries (2 AA alkaline or rechargable)
Battery Cover
Servicing the Meters
Only qualified personnel should perform service procedures. Read the Safety
Information section before performing any service procedures.
Do not service alone. Do not perform internal service or
adjustments of this meter unless another person capable
of rendering first aid and resuscitation is present.
Use care when servicing with power on. Dangerous
voltages or currents may exist in this meter. Disconnect
power, remove battery (if applicable), and disconnect test
leads before removing protective panels, soldering, or
replacing components.
To avoid electric shock, do not touch exposed
connections.
Service only in a clean, dry environment.
Annual calibration verification is recommended.
Installing improper fuses can cause injury and meter
damage.
2
Figure 10. Replacing the Batteries
WWarning
True RMS Digital Multimeters
Servicing the Meters
1
ahr20f.eps
49