Fluke 724 User Manual page 21

No Name
Turns the power on or off.
Selects voltage measurement function in the upper display.
Selects the mA measurement function in the upper display.
Activates a 24-volt loop supply while measuring mA.
Turns backlight on or off. Turns contrast adjust mode on when powering up.
Displays temperature in degrees Celsius when in TC or RTD functions.
Displays temperature in degrees Fahrenheit when in TC or RTD functions.
Recalls from memory a source value corresponding to 100 % of span and sets it as the source value.
Press and hold to store any source value as the 100 % value.
Increments output by 25 % of span.
Decrements output by 25 % of span.
Recalls from memory a source value corresponding to 0 % of span and sets it as the source value.
Press and hold to store the source value as the 0 % value.
Identifies Firmware version. Press and hold
Table 4. Key Functions
Description
when powering up.
Temperature Calibrator
Getting Acquainted with the Calibrator
11