Fluke 712, 714 and 724
Temperature Calibrators
26
Specifications – 712 and 714 Calibrators
Model
Function
Fluke-712
Measure/simulate
RTD
Measure/simulate
Resistance
Fluke-714
Measure/simulate
Thermocouple
Measure/simulate
mV
General specifications for all Fluke 712 through 718 calibrators
Maximum voltage: 30 V Non-operating temperature: -40 °C to 60 °C Operating temperature: -10 °C to 55 °C
Relative humidity: 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C)
Operating altitude: 3,000 m max Shock: 1m drop test Vibration: Random, 2 g, 5-500 Hz
Safety: CSA C22.2 No. 1010.1:1992 EMC: EN50082-1:1992 and EN55022:1994 Class B
Size/weight (HxWxD) (712-717): 187 mm x 87 mm x 32 mm (7.35 in x 3.41 in x 1.25 in) 330 g (12 oz)
Size/weight (HxWxD) (712-717 with holster and FlexStand™): 201 mm x 98 mm x 52 mm (7.93 in x 3.86 in x 2.06 in) 600 g (21 oz)
Size/weight (HxWxD) (718): 210 mm x 83 mm x 62 mm (8.25 in x 3.27 in x 2.44 in) 737 g (26 oz)
Size/weight (HxWxD) (718 with holster): 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in) 992 g (35 oz)
Power: 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Battery life: 4 to 20 hours, typical, depending on functions used
Warranty: Three-years (one year on pressure pump in Fluke 718)
Recommended accessories – 712, 714 and 724 Calibrators
TL75 (712 and 714)
See page 39
TL75 (724)
See page 39
For more information, go to www.fluke.com/tempcal
Accurate and rugged,
temperature calibration tools.
The Fluke 710 Series temperature calibrators deliver out-
standing performance, durability and reliability. Offered
in the rugged Fluke 80 Series DMM package, the calibra-
tors are compact, lightweight, and easy to carry. And
with a push-button interface, similar to the multifunction
Fluke 740 Series Documenting Process Calibrators, the
710s are easy to use. Each calibrator is EMI tolerant,
dust- and splash-resistant, and features a removable
battery door for quick battery changes.
Fluke 712 RTD Calibrator
•
Compatible with pulsed current transmitters
•
Measure temperature from an RTD probe
•
Simulate RTD output
•
Operates with seven types of RTD
•
Measure additional RTDs using Ohms measurement
function
•
Simulate additional RTDs using Ohms source function
•
°F or °C selectable
•
Four shrouded banana jacks
Fluke 714 Thermocouple Calibrator
•
Measure temperature from TC probes
•
Simulate TC output
•
Operable with nine types of thermocouples
•
Calibrate linear TC transmitter with mV source function
•
Selectable °F or °C
•
Thermocouple mini-jack termination
•
Available as accessories: Fluke 700TC1 and TC2
Thermocouple Mini-plug Kits
Range
Resolution
-200 °C to 800 °C
0.1 °C, 0.1 °F
(Pt 100-385)
15 Ω to 3200 Ω
0.1 Ω
-200 °C to 1800 °C,
0.1 °C or °F
depending
(1 °C or °F; BRS)
on type
(K, -200 °C to
1370 °C)
-10 to 75 mV
0.01 mV
C550 (712 and 714)
TL220 (712 and 714)
See page 44
See page 39
TL220 (724)
C100 (724)
See page 39
See page 44
www.MyFlukeStore.com
Accuracy
Notes
0.33 °C, 0.6 °F
Pt; 100 200 500 1000
(Pt 100-385)
(385); Pt 100 (392);
Pt 100 (392) JIS;
Ni 120 (672)
0.1 Ω to 1 Ω
0.3 °C + 10 µV
9 TC types;
J K T E R S B per NIST
175 and ITS-90
L U per DIN 43710 and
PTS-68
0.025 %
+ 1 count
C25 (712 and 714)
80PK-24 (714)
See page 44
See page 42
80PK-3A (724)
80PK-IR (724)
See page 42
See page 42
Temperature Calibration Data Sheet
(Literature code 1560369)
See how Fluke can help you
calibrate, troubleshoot and verify
the most common temperature
devices, faster and easier.
Fluke 724 Temperature
Calibrator
•
Source/measure TCs, RTDs, volts
and ohms
•
Measure mA while supplying
loop power
•
25 % and 100 % stepping,
auto-step and auto ramp
•
For specifications, see page 29
Included accessories
Each 71X calibrator includes: C81Y
Protective Yellow Holster with
Flex-Stand ™ , test leads and alligator
clips (excluding model 714), single
9 V alkaline battery and instruction
sheet (14 languages).
Ordering information
Fluke-712
RTD Calibrator
Fluke-714
Themocouple Calibrator
Fluke-724
Temperature Calibrator
(also see page 29)
Need help?
Do you have a question about the 712 and is the answer not in the manual?
Questions and answers