Electrical Requirements - Whirlpool ACE184XR0 Use & Care Manual

Window installation
Window opening measurements:
• 261/2 '' (66.1 cm) minimum to 40" (101.6 cm) maximum
opening width.
• 20" (50.8 cm) minimum opening height.
1
A C
B
h
A. 26 _" (66.1cm) minimum
B. 20" (50.8 cm) minimum
Through-the-wall installation
The wall opening measurements should be:
• Width: 261/2 '' (66.1 cm) plus twice thickness of wood used to
build frame.
• Height: 193/4 '' (50.2 cm) plus twice thickness of wood used to
build frame.
C
A. 19_" (50.2 cm)
B. 26 _" (66.1 cm)
t
C
C. Wood thickness
E_ectdca_ Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrica_ shock.
Ground wire must be connected to ground screw located in lower
right corner of air conditioner when air conditioner is in cabinet.
The electrical ratings for your air conditioner are listed on the
model and serial number label. The model and serial number
label is located behind the front panel on the flange below the
control panel area.
Specific electrical requirements are listed in the chart below.
Follow the requirements for the type of plug on the power supply
cord.
Power supply cord Wiring requirements
• 115 volt (103.5 min. -
(_ 126.5 max.)
• 0-12 amps
• 15-amp time-delay fuse or
circuit breaker
• Use on single outlet circuit only.
• 230 volt (207 min. - 253 max.)
1/4"
(o.6ore) • 0-12 amps
_ _
•
15-amptime-delayfuseor
circuit breaker
• Use on single outlet circuit only.
• 230 volt (207 min. - 253 max.)
•
0-16 amps
• 20 amp time-delay fuse or
circuit breaker
• Use on single outlet circuit only.
• 230 volt (207 min. - 253 max.)
1/2"
(1.3 cm)
•
0-24 amps
_ _
•
30 amp time-delay fuse or
circuit breaker
• Use on single outlet circuit only.