Using; Connection And Usage Of The Product - Fantec LD-H35U3 Manual

3. Using

3.1. Connection and usage of the product

This product owns a USB 3.0 interface, so it can support hot plug &
play. You can connect and use it under the follow system.
In Microsoft operating system：
A．Startup the PC
• Make sure the PC works normally.
• Connect the USB cable.
• Indicator of the product turns on.
B．The green iconc appears and the hardware is found by the system
The green arrowhead icon appears right down the corner of the
screen, and the product is recognized by the operating system.
C． Open" my computer" and the new disk appears.
If there were partitions C and D, the system will assign drive
letter E for the disk.
The speed of disk symbol appearing may vary, because of the
difference between hardware and software. This is a normal
behavoir.
D．Common usage.
The operation is similar to a common hard disk.
The LED flickers during the reading and writing process.
The product indicator stops flickering or slow down flickering if
FANTEC LD-H35U3Manual
EN - 13 -