System Setup:
Connection to your computer:
Few cautions before using RAID enclosure
1. Do not cover or block the ventilation holes on the enclosure.
2. Check for visible damage on unit, accessories and cables before tuning on the
power.
3. Do not expose the enclosure to water and humid conditions.
Setting Mode:
None-RAID: (Single Mode) Computer will show up as two independent drives. This
function can be use if only one HDD is installed. Or, two different brands or capacities
of HDDs are installed.
RAID0 - Spanning: Two HDDs will show up as one large single drive. Spanning is an
array (not RAID) that is written sequentially across two drives.