Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fantec MR-35US3R
Summary of Contents for Fantec MR-35US3R
- Page 1 Fantec MR-35US3R MANUAL...
-
Page 2: Table Of Contents
CONTENT 1. Product Introduction Features 2. Operation 2.1 Hard Disk Installation 2.2 USB3.0 interface or eSATA interface 2.3 RAID Mode settings 2.4 Rebuild Mode 2.5 Initialization, Partitioning and Formatting 3. Notes 3.1 References 4. Raid Modes description... -
Page 3: Product Introduction
1. Product Introduction 1.1 Features: The MR-35US3R provides easy access to four standard 3.5” SATA hard drives through a super speed USB3.0 port or e-SATA port. The device provides USB 3.0 super speed of 5Gbps and e-SATA of 3.0Gbps to reach best data-storage performance. -
Page 4: Operation
2. Operation 2.1 Hard Disk Installation: Sway from side to side the lock , and pull the doorknob to insert 4 hard disks. Close the doorknob and the installation will be completed (The step will be represented in terms of following graphs). Note: Sway the lock at the instructed point .Now you can open the doorknob in order to install or unload the hard disk. -
Page 5: Raid Mode Settings
2.3 RAID MODE settings () CLEAR RAID or JBOD Mode At first set the MODE switch to Clear MODE. Then keep the SET button pressed and press the power switch. The HDD LED will glitter in turn blue & red while it carries on the self-checking. -
Page 6: Rebuild Mode
() 3. RAID3 MODE Switch to RAID 3 and press SET button. After a few seconds, the computer will automatically capture an USB device. Then open computer management in order to initialize and format the HDD. At this point all information will be deleted. During formatting the HDD, the MR-35US3R HDD LED glitter with purple light. -
Page 7: Initialization, Partitioning And Formatting
2.5 Initialization, Partitioning and Formatting... -
Page 17: Notes
3. NOTES: 3.1 References 1. At first usage please execute the Clear RAID mode, to adjust the unit to neutral settings. 2. Changing the RAID mode will cause data lost. 3. Please refer to the instructions when switching the RAID mode, otherwise the execution might fail. -
Page 18: Raid Modes Description
4. RAID Mode description...