3.2. Exit and draw out the product
As a USB device, it supports hot swap. Please follow the procedure
below to make sure a normal exit from the system and to protect the
integrality of the system and the safety of the product.
In Microsoft operation system:
A. Make sure the product is not under reading or writing status.
It should run no reading or writing operation.
There sould be no flickering on the LED indicator.
B. Click the green icon at the right down corner.
The green icon is illustrated below.
Right click the green icon and the option of USB device
directory appears.
C. Click the popup to remove the device .
D. The system prompts: The device has been removed from the
system safely.
E. Click" OK", and the system is closing the dialogue box.
F. Remove product from the PC
Finish.
FANTEC LD-H35U3Manual
EN - 15 -