Extreme Networks Summit WM Maintenance Manual page 70

Restoring the backed-up image
4 Enter 5. The following menu is displayed.
1) Display Current Rescue Interface Info
2) Enter Interface Information
3) Change ip address
4) Change ip mask
5) Change default gateway
6) Test interface by ICMP (ping)
7) Return to the main menu
5 Configure the Network Interface.
To configure the Network Interface:
a In the Network Interface menu, press 2, and then enter the following:
IP address of your WM200/2000 Controller's Management Ethernet Port
■
IP mask
■
IP address of Gateway
■
Your choice> 2
Please enter Interface information
Format <ip>:<netmask> <gw optional>
Input: 192.168.1.201:255.255.255.0 192.168.1.1
Configuring interface ...
Setting up network interface ...Done!
6 Press any key to return to the Main menu.
7 Enter 4 in the Main menu to configure the FTP settings. The FTP menu is displayed.
1) Enter FTP Settings
2) Change ftp server ip address
3) Change ftp port
4) Change user name
5) Change password
6) Change ftp directory
7) Change file name
8) Display current ftp settings
9) Display backup images
10) Download image from ftp server
11) Upload image onto the ftp server
12) Return to the main menu
Your choice: 1
Command syntax: ftp://<user>:<password>@<ftp_ip>:<port>/<directory&file>
~port information is optional: the default value is 21~
Please enter ftp info:
8 Enter the FTP information.
ftp://administrator:abc123@192.168.4.181//tester/v5r1/backup.tgz
9 Return to the Main menu by pressing any key.
Rescue AC Start-up Menu. Use with extreme caution.
1) Force system recovery
2) Create System Backup Image
3) Display Backup Images
4) FTP Menu
5) Network Interface Menu
6) Manually run File System Check Utility (fsck)
7) Restore Backup Image Directly From The FTP Server
70
Summit WM Maintenance Guide, Software Version 5.3