Extreme Networks Summit WM Maintenance Manual page 110

Recovering the Summit WM Controller's lost password
3 Select the Rescue Mode, and then press Enter. The Rescue Start-up Menu appears.
Rescue Start-up Menu. Use with extreme caution.
1) Force system recovery
2) Configure interface
3) Configure ftp settings
4) Network settings Menu
5) FTP settings Menu
6) Create backup
7) Flash Menu
8) Authentication Service Management Menu
9) Reboot
WARNING! - Forcing system recovery will erase all files, and reinstall the backup
image.
Reboot will restart the system back into Normal mode.
If you have any questions about these options, please contact Support.
Your choice>
4 Type 8. The Authentication Service Management menu appears.
Authentication Service Management Menu
======================================
1) Set Login Mode to Local
2) Reset Accounts and Passwords to Factory Default
3) Change administrator password
4) Return to main menu
Please enter your choice:
5 Type the sequence number of the appropriate option, given in the Authentication Service
Management menu.
Set Login Mode to Local — Type 1 if the login authentication mode was set to RADIUS-based
●
authentication, and you want to revert to the local login authentication mode.
Reset Accounts and Passwords to Factory Default — Type 2 if you want to reset the login
●
accounts and password to factory defaults.
Change administrator password — Type 3 if you want to change the administrator's password.
●
Return to main menu — Type 4 if you want to return to the main menu.
●
6 After you have used any of the first three options in the Authentication Service Management menu,
press Enter to return to the main menu.
Rescue AC Start-up Menu. Use with extreme caution.
1) Force System Recovery
2) Create System Backup Image
3) Display Backup Images
4) FTP Menu
5) Network Interface Menu
6) Manually run File System Check Utility (fsck)
7) Restore Backup Image directly from the FTP server
8) Authentication Service Management Menu
9) Reboot
WARNING! - Forcing system recovery will erase all files, and reinstall
the image installed at the factory.
Reboot will restart the system back into Normal mode.
7 Type 9. The system restarts into normal mode.
110
Summit WM Maintenance Guide, Software Version 5.3