Extreme Networks Summit WM Maintenance Manual page 40

Upgrading the Summit WM Controller from V5R3 to V5R3 General Patch (GP)
To perform a local upgrade of Summit WM Controller software:
1 From the main menu, click Summit WM Controller. The Summit WM Controller page is displayed.
2 From the left pane, click Software Maintenance. The SWM Software tab is displayed.
3 Select Local, and then click the image file you want to upgrade to from the Select upgrade list.
4 If applicable, backup the current system image:
To save the backup image locally, select the Flash option, and then type a file name for the
●
backup image in the Filename box. The filename must end with the .tgz extension.
NOTE
If you are performing an upgrade on a Summit WM20 Controller, the Flash option is not available. Instead, to
save the backup image locally, select the Local option. The Filename box is populated with the automatically
generated file name for the backup image. You cannot edit the file name of the backup image file.
To save the backup image on a remote FTP server, select the Remote option, and then type the
●
following:
FTP Server – The IP address of the FTP server that will store the image file.
■
User ID – The user ID used to log in to the FTP server.
■
Password – The corresponding password for the user ID.
■
Confirm – The corresponding password for the user ID, to confirm it was typed correctly.
■
Directory – The directory on the server in which the image file is to be stored.
■
Filename – The name of the image file. The filename must end with the .tgz extension.
■
5 If applicable, clear the Backup system image to option if you do not want to save a backup image of
your current system.
40
Summit WM Maintenance Guide, Software Version 5.3