Extreme Networks Summit WM Maintenance Manual page 61

b Type the following string. Provide the specific username for your FTP server (in the following
example, the user name ftpadmin is used), password, IP address, directory path, and file name.
The following is the example of the string.
ftp://ftpadmin:passwd@192.168.3.10:21//builds/ac/mainBackup/backup.tgz
4 Check the Network settings.
To check the Network settings:
a In the Rescue mode, press 4. The following menu is displayed.
Your choice> 4
NETWORK SETTINGS
----------------
1) Assign ip address
2) Assign netmask
3) Assign default gateway ip address
4) Display current settings
5) Setup interface
6) Test interface by ICMP (ping)
7) Return to the main menu
Your choice:
b Enter 4 to display the current settings.
NOTE
Any network parameter can be changed from this menu.
c Test the interface by selecting Option 6 and then entering some IP address that is reachable from
the controller.
d Enter 7 to return to main Rescue menu.
5 Check the FTP settings.
To check the FTP settings:
a In the Rescue menu, press 5.
Your choice> 5
The following menu comes up:
FTP SETTINGS
----------------
1) Assign ftp server ip address
2) Assign user name
3) Assign password
4) Assign ftp directory
5) Assign file name
6) Display current settings
7) Return to the main menu
Your choice:
b Enter 6 to display the current settings.
NOTE
Any FTP parameter can be changed from this menu by selecting the parameter's option and then entering the
new value.
The file name corresponds to the image to be restored, i.e., the backed-up file created as described in
"Backing up the existing V5R1/V5R3 image" on page
Summit WM Maintenance Guide, Software Version 5.3
18.
61