Extreme Networks Summit WM Maintenance Manual page 44

Upgrading the Summit WM Controller from V5R3 to V5R3 General Patch (GP)
To perform a remote upgrade of Summit WM Controller software using a downloaded image file:
1 From the main menu, click Summit WM Controller. The Summit WM Controller page is displayed.
2 From the left pane, click Software Maintenance. The SWM Software tab is displayed.
3 Select Remote, and then type the following:
FTP Server – The IP address of the FTP server to retrieve the image file from.
●
User ID – The user ID used to log in to the FTP server.
●
Password – The corresponding password for the user ID.
●
Confirm – The corresponding password for the user ID, to confirm it was typed correctly.
●
Directory – The directory on the server in which the image file that is to be retrieved is stored.
●
Filename – The name of the image file to retrieve.
●
Destination – Select the location where the image file is to be saved:
●
Flash – The image file will be saved on the CF card.
■
Local – The image file will be saved on the Summit WM Controller.
■
4 Click Get Image now. The FTP Image window is displayed, providing the status and results of the
FTP upload. The image is uploaded onto your system and added to the Select upgrade list.
5 In the Select upgrade list, click the image file you want to upgrade to.
6 If applicable, backup the current system image:
To save the backup image locally, select the Flash option, and then type a file name for the
●
backup image in the Filename box. The filename must end with the .tgz extension.
To save the backup image on a remote FTP server, select the Remote option, and then type the
●
following:
FTP Server – The IP address of the FTP server that will store the image file.
■
44
Summit WM Maintenance Guide, Software Version 5.3