Extreme Networks Summit WM Maintenance Manual page 62

Restoring the backed-up image
c Enter 7 to return to the Main menu.
6 Perform a system recovery.
To perform a system recovery:
a In the Rescue mode, press 1.
Your choice> 1
The following menu comes up if the flash card is mounted on the controller:
Please select the restore source:
1) Flash
2) FTP
NOTE
If the flash card is mounted on the controller, skip the following content and go to Step b.
The following message comes up if the flash card is not mounted on the controller.
Make sure correct information is entered for Interface and FTP settings.
IP: 192.168.4.195 netmask 255.255.255.0 gateway:
FTP Settings: IP 192.168.4.181, port 21, user: administrator, password: abc123,
directory: backup/, file backup.tgz
This procedure is irreversible, do you wish to continue (Y/N)?
NOTE
If the flash card is not mounted on the controller, skip Step b and go to Step c.
b Enter 2 to select the FTP as the restore source. The following message is displayed.
Make sure correct information is entered for Interface and FTP settings.
IP: 192.168.4.195 netmask 255.255.255.0 gateway:
FTP Settings: IP 192.168.4.181, port 21, user: administrator, password: abc123,
directory: backup/, file backup.tgz
This procedure is irreversible, do you wish to continue (Y/N)?
c Enter Y. The following message is displayed.
Performing System recovery, this may take a while...
kjournald starting.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Deleting main partition (ignore errors)...
Removing old files...
kjournald starting.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Passive mode on.
System Recovery Complete!
Reboot the system for changes to take effect.
Proceed with reboot (y/n):
62
Commit interval 5 seconds
Commit interval 5 seconds
Commit interval 5 seconds
Commit interval 5 seconds
Summit WM Maintenance Guide, Software Version 5.3