Web Pages - Extreme Networks EAS 100-24t Switch Hardware Installation Manual

Chapter 5: Web-Based Switch Configuration

Web Pages

When you connect to the management mode of the switch with a Web browser, a login window is
displayed. Enter a user name and password to access the switch's management mode.
Below is a list and description of the folders and main windows available in the Web interface:
Configuration – Contains main windows concerning Device Information, System Information, Serial
●
Port Settings, IP Address, Port Configuration, Static ARP Settings, User Accounts, System Log
Configuration, MAC Address Aging Time, Web Settings, Telnet Settings, CLI Paging Settings,
Firmware Information, SNTP Settings, SMTP Settings, SNMP Settings.
L2 Features – Contains main windows concerning Jumbo Frame, 802.1Q Static VLAN, Q-in-Q, 802.1v
●
Protocol VLAN, GVRP Settings, Asymmetric VLAN Settings, MAC-based VLAN Settings, PVID
Auto Assign Settings, Port Trunking, LACP Port Settings, Traffic Segmentation, IGMP Snooping,
MLD Snooping Settings, Port Mirror, Loopback Detection Settings, Spanning Tree, Forwarding &
Filtering, and LLDP.
QoS – Contains main windows concerning Bandwidth Control, Traffic Control, 802.1P Default
●
Priority, 802.1P User Priority, QoS Scheduling Settings, Priority Mapping, TOS Mapping, and DSCP
Mapping.
Security – Contains main windows concerning Trusted Host, Port Security, 802.1X, SSL Settings,
●
SSH, Access Authentication Control, and MAC-based Access Control Settings.
ACL – Contains the main windows concerning ACL Configuration Wizard, Access Profile List, ACL
●
Finder, and ACL Flow Meter.
Monitoring – Contains main windows concerning Cable Diagnostic, CPU Utilization, Port
●
Utilization, Packet Size, Memory Utilization, Packets, Errors, Port Access Control, Browse ARP Table,
Browse VLAN, IGMP Snooping, MLD Snooping, LLDP, MBA Authentication State, Browse Session
Table, MAC Address Table, and System Log.
Save & Tools – Contains main windows concerning Save Configuration, Save Log, Save All,
●
Configuration File Upload & Download, Upload Log File, Reset, Ping Test, Download Firmware, and
Reboot System.
NOTE
Be sure to configure the user name and password in the User Accounts window before connecting the
switch to the greater network.
34
Extreme Networks EAS 100-24t Switch Hardware Installation Manual