Table of Contents
Advertisement
Chapter 2: Installation
Installing the Switch without the Rack
When installing the switch on a desktop or shelf, the rubber feet included with the switch should first
be attached. Attach these cushioning feet on the bottom at each corner of the device. Allow enough
ventilation space between the switch and any other objects in the vicinity.
Figure 7: Prepare Switch for installation on a desktop or shelf
Installing the Switch in a Rack
The switch can be mounted in a standard 19" rack. Use the following diagrams as a guide.
Figure 8: Fasten mounting brackets to Switch
Fasten the mounting brackets to the switch using the screws provided. With the brackets attached
securely, the switch can be mounted in a standard rack as shown in the next figure.
Extreme Networks EAS 100-24t Switch Hardware Installation Manual
18
Advertisement
Table of Contents
