Table of Contents
Advertisement
@
• The tone feature
on[y
applies when the dia[
mode is set to pu[se.
• This specia[ number
can be stored in a
memory [ocation.
This
is referred
to as Chain
Dia[ing
(see page 43).
Mute
Microphone
You can temporarily turn off the microphone so that the person you are talking with cannot
hear you.
1)Press menu/del during talk mode (while phone is in use).
2)Press ring/vol/A
or ring/vol/v
to move the pointer to tiut.e and then select/_.
Hu,Se0.__ and iilii appear in the display. To cancel muting, repeat above step again when Mute
is set to on, Hute 0.+".+" appears.
Tone Dialing
Switch-over
Some telephone
companies
use equipment
that requires pulse
diating (sometimes
referred to as rotary dialing). If you need
to enter tone dialing digits, you can switch-over to tone
dialing during the call. This feature is useful when you need
tone dialing to use automated systems, for example, entering
your bank account number after you have ca[led your bank.
Initially
make your ca[[ with the pulse dialing mode. Once your
ca[[ connects, press _/tane/<-.
Enter the desired number.
These digits wi[[ be sent as tone dialing. Once the ca[[ ends,
the tone mode is canceled and pulse dialing mode resumes.
i
[ea_a_/
speaker transfer/pbone
pause
int'com
book
Traveling
Out-of-Range
During a ca[[, as you begin to move your handset too far from your base unit, noise may
increase.
If you pass the range Umits of the base unit, you wi[[ hear a beep and see Out c,+
ea_o, ge on the display, and then the handset
returns to standby mode. You may return to the
ca[[ if you move your handset within the range limits of the base and press talk/flash
or
speaker within 30 seconds.
[32]
BASICS
www.uniden.com
Advertisement
Table of Contents
