Mute Microphone; Tone Dialing Switch-Over (Australia Only) - Uniden DSS7815 +1 Series Owner's Manual

Mute Microphone

You can temporarily mute the microphone so that the caller
cannot hear you.
1) Press the MUTE soft key during talk mode
(while the phone is in use) to mute the microphone
2) and appear in the display. To cancel
Mute On
muting, repeat above step again when Mute is set to
on, appears.
Mute Off
Tone Dialing Switch-over
(Australia only)
If your telephone company requires pulse dialing,
you can switchover to tone dialing after the call connects. This
feature is useful when you need tone dialing to use any automated
menu systems, such as telephone bank tellers, telephone
prescription refills, customer support menus, etc.
If your phone is set to pulse dialing mode, make your call normally. Once your call connects,
press the /tone/ key. Any digits you enter from then on will be sent as tone digits. When
this particular call ends, the phone automatically returns to pulse dialing mode.
Talk
Mute On
MUTE PRIVACY
[32]