Uniden DCT646-2 Series Quick Easy Steps Manual page 13

Hide thumbs Also See for DCT646-2 Series:
Table of Contents

Advertisement

• Use
ontythe
Uniden
(BT-446)
rechargeabte
battery
pack
supplied
with
your
cordless
telephone.
• Rep[acement
battery
packs are a[so
avaitab[e through
the
Uniden Parts
Department
at (800)
554-3988,
Monday
thru
Friday from 8:00
a.m. to 5:00 p.m. or
ontine at
www.uniden.com
B. Instat[
the rechargeabte
battery
pack into
the
handset
Charge the handset battery
pack for at {east 15-20
hours before using your new cord{ess
tetephone
for the first time!
The handset is powered
by a rechargeabte
battery
pack. The
battery
recharges
automaticatty
when the handset
is ptaced in the base unit.
To maximize
the charge capacity
of your battery
pack, DO NOT ptug the tetephone
cord into the base unit
and watt jack untit
the battery
is furry charged.
1)
2)
Press down on the handset
battery
case cover (use the finger
indention
for a better
grip) and stide the cover downward
to remove.
Ptug the battery
pack connector
(red & btack wires) into
the
jack inside
the battery
compartment
(the connector
notches
fit
into
the grooves of the jack onty one-way).
Match the wire
cotors to the potarity
tabet in the battery
compartment,
connect
the battery,
and tisten for a dick
to insure
connection.
3) Make sure you have a good connection
by stightty
putting
on the BLACK"
4)
s)
battery wires. If the connection is secure, the battery jack witt
remain in ptace.
Ptace the battery case cover back on the handset by stiding it
upwards untit it dicks into ptace.
Ptace the handset in the base unit for 15-20 hours without
interruption.
The base unit's LEDtight (tabeted charge)
ittuminates once the handset is ptaced in the base. The LEDtight
witt ittuminate whether the battery pack is connected or not.
If the base charge LED tight does not ittuminate:
• Check to see if the AC adapter is ptugged into the base unit and the etectricat watt outtet
property (use onty the supptied AC adapter. Do not use any other AC adapter).
• Check to see if the handset is sitting correctty in the base and making good contact with
the base unit's charging contacts.
[12]
GETTING
STARTED
www.uniden.¢om

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dct646 series

Table of Contents