Mute Microphone; Tone Dialing Switch-Over - Uniden TRU 8860 Series Owner's Manual

Mute Microphone

You can temporarily mute the microphone so that the
caller cannot hear you. Press the MUTE soft key during
talk mode (while the phone is in use) to mute the
microphone.
M ut e O n
cancel muting, press the MUTE soft key again.

Tone Dialing Switch-over

If your telephone company requires pulse dialing, you
can switch-over to tone dialing after the call
connects. This feature is useful when you need tone
dialing to use any automated menu systems, such as
telephone bank tellers, telephone prescription refills,
customer support menus, etc.
If your phone is set to pulse dialing mode, make your
call normally. Once your call connects, press the
from then on will be sent as tone digits. When this particular call ends, the phone
automatically returns to pulse dialing mode.
w w w . u n i d e n . c o m
and appear in the display. To
appears.
M u te Of f
/tone/< key. Any digits you enter
*
note
•The tone feature only
applies when the dial
mode is set to pulse.
•This special number
can be stored in a
memory location. This
is referred to as Chain
Dialing (see page 40).
B A S I C S [ 3 6 ]