Uniden DCT646-2 Series Quick Easy Steps Manual page 18

Direct wa[[ mounting
If you don't have a standard wail plate, you can mount your phone directly to the wail.
Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could
cause a hazard when inserting screws into the wail
• Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.
• Make sure the wail materia[is capable of supporting the weight of the base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the
wail material where the base unit wi[[ be placed.
1) Insert two mounting screws into the wail (with their
appropriate anchoring device), 3-15/16 inches apart.
Allow about 1/8 of an inch between the wail and screw
heads for mounting the phone.
2) Refer to steps 1 through 6 on page 16 to mount
the telephone.
TOP
1=3/8 in.
in=
www.uniden.¢om GETTING STARTED [17]