Your Pin Code - Toshiba Regza 52RV535U Owner's Manual

52RV535U ENbook Page 47 Tuesday July 22 2008 5:25 PM
Selecting the optical audio output format
You can use this feature to select tile optical audio output
format when you connect a Dolby Digital decoder or
other digital audio system to the DIGITAL AUDIO OUT
terminal on the TV (_ "Connecting a digital audio
system" on page 18).
To select the optical audio output format:
1
Tune to a digital source
on the ANT/CABLE
input.
2 From the Audio menu, highlight Audio Setup and
press @.
3 In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device.
4 To save the new settings, highlight Done and press
0.
To revert to the factory defaults, highlight Reset and
press @.
Usingthe Dolby® Digital Dynamic Range
Control feature
This dynamic range control feature causes the ATSC
dynamic range to be further compressed, allowing you
to switch from digital to analog broadcasts at the same
dynamic range.
To use the Dolby Digital Dynamic Range Control:
From the Audio menu, highlight Audio Setup and
press @.
In the Dolby Digital Dynamic Range Control field,
select Compressed. When Standard is selected,
the
audio is output with minimal compression.
To save the new settings, highlight Done and press
0.
To revert to the factory defaults, highlight Reset and
press @.
Note:
• 7°his item will be grayed out for NFSC signals, Video,
ColerStream, HDMI, and PC inputs.
• Dolby Digital Dynamic Range Control will function in relation
to Optical Output Format (PCM mode).
Using the Locks menu
The Locks menu includes the Enable Rating Blocking,
Edit Rating Limits, Channels Block, Input Lock, Control
Panel Lock, Game Timer, and New PIN Code features.
You can use these features after entering the correct PIN
code.
Entering the PIN code
1
on the remote control or TV control panel, press .}_u
and highlight the Locks menu icon.
2
Press V, which displays the PIN code entry screen.
• The Lock System screen (below) appears if a PIN
code has not been stored. Press the Channel
Number buttons to enter a new four-digit code,
enter the code a second time to confirm, and press
0.
• The Locks/Active screen appears if the PIN code
is already stored. Use the Number buttons to enter
your four-digit code and press 0.
If the wrong PIN code is entered, the message "Incorrect
PIN code, please try again!" appears. Highlight Retry
and press 0. Enter the code again and press 0.
When the correct PIN code is entered, the Locks menu
opens.
If you cannot remember your PIN code
While the PIN code entering screen is displayed, press
RECALL
O four times within five seconds. The PIN code will be
cleared and you can enter a new PIN code.
(contim_ed)
47
RV535U (E/F) Web 213:276