Chapter 7: Using The Tv's Advanced Features; Usingthe Advanced Picture Settings Features; Using Srt 'Msuper Upconversion; Using Dynamic Contrast - Toshiba Regza 52RV535U Owner's Manual

52RV535U ENbook Page 56 Tuesday July 22 2008 5:25 PM
Usingthe advanced picture settings
features
Using SRr" Super Upconversion'"
Tile SRT _' Super Upconversion _ feature allows you to
select the mode and adjust the levels for your desired
picture settings.
To adjust the SRT Super Upconversion settings:
1
Press M_u and open
the Video menu.
2 Highlight Picture Settings and press @.
3
Highlight Advanced Picture Settings and press
0.
4
Highlight SRT Super Upconversion and press @.
5 In the Mode field, select either Off, Auto, Mode 1,
Mode 2, or Mode 3.
Off Sets this feature Off.
Changes the setting automatically
Auto depending on each input signal and
resolution.
For low quality content such as a
Mode 1 picture with much noise (e.g. SD
broadcasting)
For middle quality content such as a
Mode 2 picture with less noise (e.g. DVD
Video)
For high quality content such as a
Mode 3 picture with little noise (e.g. HD
broadcasting)
Press • or • to highlight the Level field, and then
press • or • to select either 1, 2, 3, 4, or 5.
7
To save the new settings, highlight Done and press
0.
To revert to the factory defaults, highlight Reset and
press @.
Note:
• Some of the Advanced Picture Sethngs features will not be
available for adjustment when the Mode is set to AutoView
• 7°hisfeature maynot work properly depending on the
contenL
• The noise may appear on the image depending on the
device connected to the TV (e.g. a device with specific
enhancer function).
Using dynamic contrast
When dynamic contrast
is set to Low, Middle, or High,
the TV will detect changes in the picture quality that
affect the appearance of your contrast settings and then
automatically adjust the video.
To
1
2
3
4
select dynamic contrast preferences:
From the Video menu, highlight Picture Settings
and press @.
Highlight Advanced Picture Settings and press
0.
In the Dynamic Contrast field, select either Off,
Low, Middle or High.
To save the new settings, highlight Done and press
0.
To revert to the factory defaults, highlight Reset and
press 0.
Note: If you select one of the MIIowing factory-set picture
modes (Sports, Standard, Movie, or PC) and then
change the dynamic contrast setting, the picture mode
automatically changes to Preference
Usingthe static gamma feature
The static gamma feature allows you to adjust the levels
of black in the picture.
To adjust the static gamma settings:
1
2
3
From the Video menu,
highlight
Picture Settings
and press 0.
Highlight Advanced Picture Settings and press
0.
In the Static Gamma field, press • or • to adjust the
static gamma.
The adjustment range is within +5 from center.
• If the setting is moved in the minus direction, the
detail of black colors will be decreased.
• If the setting is moved in the plus direction, the
detail of black colors will be increased.
56
RV535U (E/F) Web 213:276