Source Selection - Toshiba Regza 52RV535U Owner's Manual

52RV535U ENbook Page 53 Tuesday July 22 2008 5:25 PM
REGZA LINK Player Control menu functions:
1 Press M_u and open the Applications menu.
2 Highlight NEGZA LINK Player Control and press
0.
3 Press • or • to select the item you want to control
and press @.
Power Turns the select device on and off.
Top Menu Accesses the top menu of a DVD.
Menu Accesses the menu of a DVD.
Accesses the contents list when you
Contents press @. At this time, the REGZA LINK
Menu
Player Control menu will disappear.
Note:
• These functions depend on the devices that are connected.
• The REGZA LINK Player Control item will be grayed out in
the following conditions:
- A non-HDMI input is currently selected.
- The Enable REGZA LINK item is set to Off
- The connected CEC device is not a playback or recording
device.
REGZA LINKinput source selection
If a REGZA LINK device with HDMI switching
capability (e.g. Audio Receiver) is connected to the
HDMI input, you can select another REGZA LINK
device that is connected to the master HDMI device
using the TV's INPUT button. See page 36 for details.
VOLUMEand MUTEcontrols of Audio
Receiver
With your TV's remote control, you can adjust or mute
the sound volume of the Audio Receiver. First, set the
MODE SELECT switch on the remote control to TV.
• _ v__adjust the volume level.
• M_Eturns off the sound.
Note:
• 7o use this function:
- Set Speaker Preference to Audio Receiver in the
REGZA LINK Setup menu_
- Confirm that a connected REGZA LINK device (such as
DVD player, ere) is selected for the Audio Receiver input
source.
• You can also use this function when the audio receiver is
connected to the TV2 DIGITAL AUDIO OUT terminal (not
HDMI connection). In this case, select a digital audio input
mode on the Audio Receiver.
• These functions depend on the device connected.
Other REGZA LINKfunctions
When the Enable REGZA LINK and each item in the
REGZA LINK Setup menu are set to On, the following
functions will be enabled.
If a connected HDMI device starts
TV Auto playing video or audio, the TV will
Input Switch automatically switch to the
appropriate HDMI input.
TV Auto If a REGZA LINK device is turned on,
Power the TV turns on automatically.
If the TV is turned off, the TV will send
Device Auto
Standby a message to turn off all of the REGZA
LINK devices connected to the TV.
Speaker
Preference
From this item, you can set your audio
output preference to the TV speakers
or the audio receiver speakers. When
this item is set to Audio Receiver, the
TV remote can be used to adjust or
mute the volume of the audio. This
item will be grayed out unless a
REGZA LINK compatible audio
receiver is comlected.
Note: When you turn on the Audio Receiver, change its input
source, or adjust the sound volume, the sound will be output
from the audio receiver's speakers even ff TV Speakers has
been se/ected. RJm the TV off and on again to output the
sound from the TV speaker&
(continued)
53
RV535U (E/F) Web 213:276