Toshiba Regza 52RV535U Owner's Manual page 14

52RV535U ENbook Page I4 Tuesday July 22 2008 5:25 PM
Connecting a DVD player with ColorStream®(component video), a VCR,
and a satellite receiver
Your TV has two sets of ColorStream _ (component video) inputs.
TV upperhackpanel
DVD player with component video
From satellite dish _f_:lN]::2_
@ ,
......... o'o v
Satellite receiverwith component video
i_ i _ I,"_'_" I
"ANT'C_ @0
TV lowerbackpanel
From antenna
StereoVCR
,,!D_o du£'°_ " I_l
;I
You will need:
• coaxial cables
• standard A/V cables
/::or better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. Do not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
If you have a mone VCR, connect L/MONO on the TV to
your VCR's audio out terminal using the white audio cable
enly_
• standard audio cables
• component video cables
gou can connect the component video cables (plus audio
cables) from the DVD player or satellite receiver to either
set of ColorStream term/kTa/s on the TV (HD1 or HD2). The
ColorStream HD1 and HD2 terminals can be used to
display Progressive (480p, 720p) and Interlaced (480i,
1080/). P/ease check the Owner's Manual of the DVD
player or satelhte in order to determine the best output
signal available (1080p is net supported).
If your DVD player or satellite receiver does net have
component video, connect a standard A/V cable to
VIDEO 2 on the side panel If your DVD player has HDMI
video, see page 16_
To view antenna or Cable channels:
Select the ANT/GABLE video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the eolorStream HD1
video input source on the TV.*
14
To view satellite programs using the component
video connections:
Turn on the satellite receiver. Select the ColorStream
HD2 video input source on the TV.*
To view the VCR or view and record antenna
channels:
Turn ON the VCR. Tune the VCR to the channel you
want to watch. Select the VIDEO 1 video input source on
the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to
record. Select the eolorStream HD1 video input source
on the TV* to view the DVD.
* To select the video input source, press INPUT on the remote control
(_r_#:page 36). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal
liability.
RV535U (E/F) Web 213:276