Stereo/Sap Broadcasts; The Audio Quality; Feature - Toshiba Regza 52RV535U Owner's Manual

52RV535U ENbook Page 46 Tuesday July 22 2008 5:25 PM
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit
a second audio program (SAP) containing a second
language, music, or other audio information (when
provided by individual stations).
When the TV receives a stereo or SAP broadcast, the
word "STEREO" or "SAP" appears on-screen when RE_)LL
is pressed. The MTS feature is only available for analog
signals on the ANT/CABLE input.
To listen to stereo sound:
1
2
3
From the Audio menu,
highlight
Audio Setup and
press @.
In the MTS field, select Stereo.
To save the new settings, highlight
Done and press
0.
To reset the settings to the factory defaults, highlight
Reset and press @.
Note:
•
You can typically leave the IV in Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
• If the stereo sound is noisy, se/ectMono to reduce the
noise_
To listen to an alternate language on an ATSC
digital station (if available):
Highlight the Language field in step 2 above, and then
press • or • to select the language you prefer.
To listen to a second audio program on an analog
station (if available):
Select SAP in step 2.
Note:
• A second audio program (SAP) can be heard only on those
TV stations that offer it. For example, a station might
broadcast another language as a second audio program. If
you have SAP on, you will see the current program on the
screen but hear the other language instead of the program's
normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station's normal
audio will be outpuL However, occasionally there is no
sound at all in SAP mede. If this happens, set the MTS
feature to Stereo mode.
Adjustingthe audio quality
You can adjust the audio quality by adjusting the bass,
treble, and balance.
To adjust the audio quality:
1
2
3
4
From the Audio menu, highlight Audio Settings
and press @.
Press • or • to highlight the item you want to adjust
(Bass, Treble, or Balance).
Press • or • to adjust the level.
• < makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
• • makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
To save the new settings, highlight Done and press
0.
To reset the settings to the factory defaults, highlight
Reset and press 0.
Usingthe StableSound ® feature
The StableSound _ feature limits the highest volume level
to prevent extreme changes in volume when the signal
source changes (for example, to prevent the sudden
increase in volume that often happens when a TV
program switches to a commercial).
To turn on the StableSound _'_ f eature:
1
2
3
From the Audio menu, highlight Audio Settings
and press 0.
In the StableSound field, select On.
To save the new settings, highlight Done and press
0.
To revert to the factory defaults, highlight Reset and
press 0.
Note: The RESETfunction returns your audio adjustments
to the following factory settings:
Bass ........ center (50)
Treble ...... center (50)
Balance ..... center (0)
StableSound. Off
To turn off the StableSound feature:
Select Off in step 2 above.
46
RV535U (E/F) Web 213:276