Toshiba Regza 52RV535U Owner's Manual page 33

52RV535U ENbook Page 33 Tuesday July 22 2008 5:25 PM
Setting the HDMI"Maudio mode
To set the HDMI audio mode:
1
2
From the Audio menu, highlight Audio Setup and
press @.
Press • or • to select HDMI 1 Audio and then press
• or • to select the HDMI 1 audio mode (Auto,
Digital, or Analog). (Auto is the recommended
mode.) See "Connecting an HDMI or DVI device to
the HDMI input" (_ page 16).
PC Audio
MTS Stereo
Language English
Optical Output Format Dolby Digital
uolby Digital ......
• Compressed
Dynamic Range Control
When viewing the HDMI i input, if
digital audio from the HDMI input
is available, it will be output. If not,
Auto
the TV will automatically detect and
output analog audio from the PC
Audio input.
When viewing the HDMI 1 input,
Digital digital audio from the HDMI input
will be output.
When viewing the HDMI 1 input,
Analog _lalog audio from the PC Audio
input will be output.
3
To save your settings, highlight Done and press @.
Note: Because the PC and HDMI 1 i?_puts share the same set
of analog audio inputs, the PC Audio menu sett#Tg influences
the HDMI 1 Audio menu setting, If PC Audio is set to "No, "the
HDMI 1 Audio setting changes to "Auto." If PC Audio is set to
"Yes," the HDMI 1 Audio setting is set to "Digital" and is
grayed out in the menu. (Also see item 4 on page 11 and
"Setting the PC Audio" on page 5L)
Viewing the digital signal meter
You can view the digital signal meter in the ANT/
CABLE digital TV input source only.
To view the digital signal meter:
2
3
From the Setup menu,
highlight
Installation
and
press @. A new set of Installation menu icons will
appear.
Open the Terrestrial menu, highlight Signal Meter,
and press @.
Press ••• • to select the digital channel whose
signal you want to check.
Note:
• ThephysicaldigitalchannelnumberhstedintheSignal
Meter screen may not correspond to a virtual TV
channel number. Contact your local broadcasters to
obtain the RF channel numbers for your local digital
stations.
• The signal strength does not change between virtual
channels on the same physical channel
To close the screen and return to the Terrestrial
menu:
Highlight Done and press @.
To return to normal viewing:
Press
EXITo,
33
RV535U (E/F) Web 213:276