Advertisement
i1_ii::!_!!i!ii!!l!l_1i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l!l_i!i!l
¸
Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
f ............................. %
DVD/VCR
TAPE
EJECT
1, 5
_TIMER
REC
Preparation:
Press DVDNCR to select the VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Check the time and date are correct [_:_.
Example:
Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1(Tape speed: SLP).
Press VCR MENU. Select "TIMER REC SET",
then press ENTER.
SET UP
VCR MENU
Press SET + or-
to select one of the program
line, then press ENTER.
Press SET + or- to select the date, then press
ENTER.
Set the start time, end time, channel
and tape
speed as in step 3.
Notes:
Press CANCEL
to move cursor backward for correction.
To record from external source set the channel to "LI" or
"L2". "L1" or "L2" will appear next to CH 125 (or 69).
To enter other programs, repeat step 2
through 4.
SET UP
• To return to the normal screen,
VCR MENU
press VCR MENU twice.
6
Press TIMER REC. The timer symbol (,_Q])will
appear on the display
and the VCR stands
by
for recording.
IT"f'Fj_r_':_I
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the Timer recording mode.
If you do not use the DVD, turn the
power off.
Notes:
• The timer recording will start at 5 seconds before the time
you predetermined.
• If the timer symbol( _] ) does not appear on the display in
spite of the pressing of TIMER REC, the cassette may not
have been ]eaded.[_
• If the cassette is ejected in spite of the pressing of TIMER
REC, the erase prevention tab of the cassette may have
been removed.[_
Notes:
"1
• If the timer symbol (L_]) blinks when the timer recording ended,
the TV program has not been completely recorded because of
an insufficient tape length. Press TIMER REC to cancel the
timer program or press TAPE EJECT to remove the cassette
tape.
• During timer recording standby mode, the VCR mode cannot be
operated. To use the VCR, press TIMER REC at first, then press
DVDNCR
to change to VCR mode. After you use the VCR,
press TIMER REC again to put the VCR into timer recording
standby mode.
• If you press TIMER REC during timer recording, the recording
operation will be interrupted.
If you press TIMER REC again
within the programmed time, the recording operation will start
again.
• After a power failure or disconnection
of the power plug, all
programmed
recording settings and time display will be lost
upon resumption of power. In this case, reset the clock [;_
and
reprogram any timer recording.
371
Advertisement
