Advertisement
nnecting
to optional equipment
You can enjoy high quality dynamic sounds of DVD video discs or audio CDs by
connecting the DVD/VCR to optional audio equipment.
For connection
to your TV, see "Connecting
to a TV" [:_ _.
I_
: Front speaker
For details of output sound, see _"
L_
: Rear speaker
: Sub woofer
B
: Center speaker
_'
: Signal flow
Dolby Digital
Do_by Digital is the surround sound technologyused in theaters showing the latest movies,
and is now available to reproduce this realistic effect in the home. You can enjoy motion
picture and live concert DVD video discs with this dynamic realistic sound by connecting the
DVD/VCR to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital
processor. If you have a Dolby Pro Logic Surround decoder, you wil_obtain the full benefit of
Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital
soundtracks, as well as from titles with the DoIby Surround mark.
Amp,erequppedw h
Dolby Digital decoder
o
ToCOAXtALV
y ToOPTICAL
I, t,
_
I
type digital | |
type digital
_
Connect either,
audio input
audio input
/La_
Optical digital cable _ f
75 _ coaxial cable
|
Manufactured
under license from Dolby
Laboratories•
"Dolby" "Pro Logic" and
the double-D symbol are trademarks
of
Dolby Laboratories•
Confidential
unpublished
works.
@1992-1997 Dolby
Laboratories•
All rights reserved.
• Use DVD video discs encoded
via
the Dolby Digital recording
system.
• Make the following
setting.
On-screen display
Select:
Page
"Audio Out Select"
"Bitstream"
[_
Recording system
E]DD
[_
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers).
• With an amplifier equipped with Doiby Digital
Connect the equipment the same way as described in "Connecting to an amplifier
equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set
the amplifier so you can enjoy Dolby Pro Logic Surround sound.
• With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with
Ddiby Pro Logic Surround
Make the following
setting.
On-screen display
Select:
_Page
"Audio Out Select" "AnaLog2oh" I 5_L_ I
Be sure to set "Audio Out Select"
to "Analog 2ch" when you enjoy
sounds of Dolby Pro Logic
Surround using this connection.
* Connect one or two rear speakers.
The output sound from the rear speakers will be
monaural even if you connect two rear speakers.
Digital Theater Systems (DTS)
_"DTS" and "DTS Digitdi Surround" are
DTS is a high quality surround technology used in theaters and now available for home use,
/ trademarks of Digita__[beate_Systems,
on DVD video discs or audio CDs.
Inc.
ffyou have a DTS decoder or processor, you can obtain the ful_ benefit of 5.1 channel DTS
encoded sound tracks on DVD video discs or audio CDs.
• Use DVD video discs or audio
CDs encoded
via the DTS
_Amplifier equipped with %
recording
system.
a DTS decoder
o
• Make the following
setting.
_ Z 6
o
On-screen display
Select:
D
type digital |
| type digital
_|
Connect either.
audio input
audio input
(_ _
"Audio Out Select"
"Bitstream"
/
!
_75
&_ coaxial cable
Recording system
DTS
I
120
Page
Advertisement
