Advertisement
touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
DVDNCR
136
Preparation:
• Turn ON _heTV and select the corresponding video input.
• Press DVD/VCR to select the VCR mode. (The VCR
indicator will light.)
Example: One-touch Timer Recording for 30 minutes.
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and SP or SLP will
appear on the screen for about 4
seconds.
PLAYMODE
SP/SLP
Set "TV" or "CATV"
option to the appropriate
position
[_.
4
Press Number
button or CH AIV to select the
channel
to be recorded.
@®®
®®®
®®®®
5
Press OTR. Recording begins. Press the button
again to stop recording after 30 minutes. Each
additional press of OTR will increase recording
time as shown in the chart below, up to a
maximum of 5 hours.
The OTR and recording time will
appear on the screen for about 4
seconds. And, "•
"will keep blinking
in the display.
Press
Recording
time
Press
Recording
time
once
NORMAL REC
6 times
3:00
twice
0:30
7 times
4:00
3 times
1:00
8 times
5:00
4 times
1:30
9 times
NORMAL
REC
5 times
2:00
REC
0
OTR
f
To cancel OTR
Press STOP or turn off the power.
STOP
"•"
will appear on screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard
recording, press DVDNCR to change to DVD mode and perform
the DVD playback _.
Advertisement
