Advertisement
i1_ill¸!_!!i!iil!l!i_ll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!lllll!l
/
Press STOP to stop recording.
"•"
will appear on screen for about
4 seconds,
STOP
To s__p _ c _ _di_g
_ P_ ra_i!Y
Press PAUSE/STILL
to avoid recording
unwanted
material.
Press again to continue
the recording.
"II1"
will appear on screen for
about 4 seconds.
PAUSE/STILL
@
mAuto
Rewind feature
This VCR will automatically
rewind
the tape when the tape
has ended (except during
OTR and timer recording).
It will
also eject the tape.
o
Notes:
The pause function will be released after 5 minutes to prevent
damage to the tape or the VCR. The VCR will change to the
STOP mode,
You can select a recording channel in the recording pause
mode.
While the VCR is recording, select your desired channel
on the TV.
When a TV is connected with an antenna cable only,
press TV/VCR to select the TV position,
The "VCR" display will go off and recording will continue,
Select the TV channel you want to watch by using the
TV channel selector.
Note:
Some CATV hookups do not permit viewing one channel
while recording another. See pages _
and _,
351
Advertisement
