Advertisement
a TV
Connect the DVDNCR
to your TV.
For details of output sound, see [_.
Notes: This method transports VHS and DVDwideo signals, For enhanced DVDwideo
performance, we recommend you
also connect the S-Video on ColorStream ® component video outputs to your TV/monitor, (see page 19,)
To wall outlet
[]
o
@
O_
[_
@
@ @_
TO VIDEO
OUT
I_
(T_iA)NALOG AUDIO OUT
Audio/video
cable (supplied)
io inputs
To video input _,
_,
J,
(yellow) _
_ (red) _ (white)
,1
TV or monitor with
audio/video
inputs
Make the following
setting.
On-screen display
Select:
Pa_Page
"Audio Out Select" "Analog 2ch" [_
Notes:
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter (not
supplied) and then connect to your TV.
• Connect the DVD/VCR
directly to your TV. If you connect the DVD/VCR to a VCR, TVNCR
combination or video selector,
the playback picture may be distorted as DVD video discs are copy protected.
118
Advertisement
