Before Setting Oven Controls - Tappan Millennia TEF352BHWA Owner's Manual

Coil surface elements electronic oven control self-cleaning oven
Table of Contents

Advertisement

Before Setting Oven
Controls
Arranging
Oven
Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATINGTHE OVEN). Always use oven mitts when using the oven.
Oven Vent Location
The oven vent is located under the left rear surface element.
When the oven
is on, warm
air is released through
the vents. This venting
is necessary for
proper air circulation
in the oven and good baking results.
REMOVING & REPLACING OVEN
RACKS
To remove, pull the rackforward until
it stops. Lift up front of rackand slide
out. To replace, fit the rack onto the
guides on the oven walls. Tilt the fronl
of the rack upward and slide the rack
back into place.
ARRANGING OVEN RACKS WITH 5
RACK POSITIONS
To bake on 1 rack, place the rack on
oosition 3 or 4. To bake on 2 racks,
place the racks on positions 2 and 4.
1st Rack Position
2ndRack Position
3rdRack Position
i i
i
4th Rack Position
_Rack
Position

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents