Before Setting Oven Controls - Tappan TGF324BHDB Owner's Manual

Before Setting Oven
Controls
Arranging Oven Racks
(Some models may have one rack.) ALWAYS ARRANGE OVEN RACKS WHEN
THE OVEN IS COOL (PRIORTO OPERATING THE OVEN). Always use oven mitts
when using the oven.
Oven Vent Location
The oven vent is located below the
backguard. When the oven ison, warm
air is released through the vents. This
venting is necessary for proper air
circulation in the oven and good baking
results.
i/p
OVEN VENT
I
REMOVING & REPLACING OVEN
RACKS
To remove, pull the rackforward until
it stops. Lift up front of rack and slide
out. To replace, fit the rack onto the
guides on the oven walls. Tilt the front
of the rack upward and slide the rack
back into place.
_J
ARRANGING OVEN RACKS WITH 5
RACK POSITIONS
To bake on 1 rack, place the rack on
position 3 or 4. To bake on 2 racks,
place the racks on positions 2 and 4.
1st Rack Position
__ 2 _1 _ Position
3_t bdk Position
5th bO_ Position
(for _ng large