Changing The Display; Using The Sleep Timer - Sony HT-7000DH Operating Instructions Manual

Changing the display
Yon can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver l\_r
this operation.
Press DISPLAY repeatedly.
Each time you press tile button, tile display
changes cyclically as follows.
All inputs except the FM and AM
band
Index name of tire inpnt a) _ Selected inpnt
-_ Sound fiekt currently applied
FM and AM band
Preset station lmme a) _ Frequency _ Sound
field currently applied
a/index imme appears only when you hax e assigned
one to the input or preset station (page 56, 66).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
Usingthe SleepTimer
You can set the receiver to turn off
automatically at a specified time.
Press ALT and then press SLEEP
repeatedly while the power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-00 ---+ 1-30-00 _ 1-00-00 _ 0-30-00
--_ OFF
When Sleep Timer is being used, "SLEEP"
lights up on the display.
Tip
To check the renmining time before the receiver
turns off press ALT and then press SLEEP. The
renmining time appears on the display. If you press
SLEEP again, the sleep timer will be canceled.
O
o
o
67us