Sony HT-7000DH Operating Instructions Manual page 47
Hide thumbs
Also See for HT-7000DH:
- Operating instructions manual (84 pages) ,
- Operating instructions (2 pages) ,
- Connection manual (1 page)
Table of Contents
Advertisement
• SUR POS.
(Surround speaker position)
Lets you specify
tile location
of your surround
speakers
for proper
implementation
of the
surround
effects
in the Cinema
Studio
EX
modes
(page 51 ).
Q
Q
f
//
• SIDE/LO
Select if the location
of your surround
speakers
corresponds
to sections
O and i_.
• SIDE/HI
Select if the location
of your surround
speakers
corresponds
to sections
O and _}.
• BEHD/LO
Select if the location
of your surround
speakers
corresponds
to sections
_
and i_.
• BEHD/HI
Select if the location
of your surround
speakers
corresponds
to sections
_
and 1_.
Tip
Surround speaker position is designed specific:ally
lk_r implementation of the Cinema Studio EX modes.
For other souu(l fields, speaker position is not so
critical.
Those sound fields were designed under the premise
that the surround speakers would be located behind
the listening position, but presentation remains fairly
consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the
immediate left and right of the listening position, the
surro/uld effects beconle/ulclear
uuless set to
"SIDE/LO"
or "SIDE/H 1".
Nevertheless, each listening environment hits many
variables, such as wall reflections, and you may
obtain better results using "BEHD/HI"
if your
speakers are located high above the listening
position, even if they are located to the immediate
left and right.
Therefore, Nthough it may result in a setting
contrary
to
the above
explauatiou,
we recommeud
that you playback multi channel surround encoded
software and select the setting that provides a good
sense of spaciousness and that best succeeds in
fl_rming a cohesive space between the surround
sound lhom the surround speakers and the sound of
the front speakers. If you are not sure which sounds
best. select "BEHD/LO"
or "BEHD/HI"
and then
use the speaker distance parameter and speaker level
atljustmeuts to obtain proper balance.
• DIMMER (Brightness
of the
display)
Lets you adjust the brightness in 3 steps.
3
0
"o
-1
47us
- Quick Links:
- 3A: Connecting the Audiocomponents
Hide quick links:
Advertisement
Table of Contents
